Road-Marking Coating

Hot-melt road-marking coating is the most widely used road marking coating currently, because of poor application environment, there is high requirements about the coating on weatherability, wear resistance, anti fouling property and bond strength.
Our Faer wax for road-marking coating customers has the following characteristics:
1、High softening point, it could greatly improve the weatherability and anti fouling performance of the coating.
2、Low melt viscosity, Less addition amount can bring ideal leveling effect in roadworks, reduce fuel consumption and improve construction efficiency.
3、High solidifing hardness, bring better surface scratch resistance and anti fouling performance

Faer Wax Technical Index

Model No. Soften point Melt Viscosity Penetration Appearance
FW1003 110-115℃ 15~25 cps(140℃) ≤5 dmm(25℃) White pellet/powder
FW8112 112-115℃ 20-30cps(140℃) 3-6 dmm(25℃) White pellet
FW8110 110-115℃ 20±5cps(140℃) 3-6 dmm(25℃) White pellet

Packing: 25kg PP Woven Bags or paper-plastic compound bag

Cautions handling and storage:stored at dry and dust free location at low temperature and protected from direct sunlight

Note:due to the nature and application of these products the storage life is limited.therefore,to obtain the best performance from the product,we recommend use within 5 years from sample date on the certificate of analysis.

Notice this product information is indicative and does not include any guarantee


Post time: May-22-2023